CHAPTER 7 PICK-UP / FEEDING SYSTEM
4) If double feeding or pickup failure occurs
during pickup operation, change the
position of the pressure spring [6] of the
separation roller.
a. If double feeding occurs, move the
hook of the spring in the direction of
arrow A.
b. If pickup failure occurs, move the hook
of the spring in the director of arrow B.
a. Do not loosen the screw
b. When mounting the
7-54
COPYRIGHT © 2002 CANON INC.
[1] used to secure the
separation pressure
spring plate in place.
separation roller unit, be
sure that the releasing
lever [1] is positioned as
shown.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[A]
[B]
Figure 7-714
[1]
Figure 7-715
[1]
Figure 7-716