Canon 1130 Service Manual page 593

CHAPTER 13 TROUBLESHOOTING
1. Fix the side of the
2. Then, lightly pull the
3. At this time, check to
6) Let the transfer drum sheet drop on its
own weight, and remove the backing
paper from both sides of the sheet.
7) without holding the transfer drum sheet,
turn the front side of the transfer ring to
wrap it around the transfer drum.
13-26
COPYRIGHT © 2002 CANON INC.
transfer drum sheet with
a long hole temporarily
in place so that that the
gap between the left
side of the transfer drum
sheet and the edge of
the transfer ring is about
0.5 mm.
transfer drum sheet to
the right so that the
middle of the sheet will
not become slack, and
attach the right side of
the sheet where a round
hole is found.
make sure that the right
edge of the transfer
drum sheet will not
overlap the edge of the
transfer ring; otherwise,
shift the left side of the
sheet where a long hole
is found, and start over
with step 2.
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Pull lightly to remove
the slack in the middle.
No overlapping.
Transfer rings
Figure 13-242
Figure 13-243
Figure 13-244