Canon 1130 Service Manual page 811

CHAPTER 13 TROUBLESHOOTING
Address bit
P013 15 control state of the fixing heater
14 not used
13 transparency sensor LED (PS69L) ON signal
12 pre-cleaning paper sensor LED (PS71L) ON signal
11 fixing upper heater drive signal
10 fixing lower heater drive signal
9 fixing oil pump (PSP1) drive signal
8 SSR2
7 not used
6 not used
5 stopper plate solenoid (SL12) drive signal
4 stopper plate solenoid (SL12) drive signal
3 not used
2 not used
1 not used
0 duplexing feeding clutch (CL14) drive signal
P014 15 not used
14 not used
13 not used
12 Gradation sensor concentration measurement LED
ON signal
11 Bk toner concentration measurement LED ON
signal
10 Y toner concentration measurement LED ON
signal
9 C toner concentration measurement LED ON signal
8 M toner concentration measurement LED ON
signal
7 not used
6 not used
5 primary charging wire cleaning motor (M6)
forward signal
4 primary charging wire cleaning motor (M6) reverse
signal
3 not used
2 not used
1 polishing roller motor (M9) reverse rotation signal
0 polishing roller motor (M9) normal rotation signal
13-224
COPYRIGHT © 2002 CANON INC.
Description
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
I/O>DC-CON
Remarks
0: during control
1: ON
1: ON
0: ON
0: ON
0: ON
1: ON
0: open, 1: closed
0: closed, 1: open
1: ON
1: ON (CLC 1140/1160/1180
only)
1: ON
1: ON
1: ON
1: ON
0: forward, 1: reverse
1: forward, 0: reverse
1: ON
1: ON
1: reverse, 0: normal
direction
0: reverse, 1: normal (roller
contact)