CHAPTER 7 PICK-UP / FEEDING SYSTEM
If you have replaced the transfer drum, be
sure to perform the following in service mode
(ADJUST>FED-ADJ;
1. Attraction timing adjustment (ATT-T-A,
ATT-A-B)
2. Image leading edge margin adjustment
(RG-XA, RG-XB, RG-Y)
3. Attraction position adjustment (TR-
DELAY_A, TR-DELAY_B)
4. Image rear end adjustment (TR-END-A,
TR-END-B)
3. Removing the Transfer Drum
Frame
1) Slide out the transfer drum frame.
2) Remove the fixing assembly.
3) Remove the transfer drum.
4) Grasp the handles of the transfer drum
frame, and detach it.
The transfer drum frame
weighs about 10 kg. Take
adequate care.
7-76
COPYRIGHT © 2002 CANON INC.
See chapter 13. II. A.
2):
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Wrong
Figure 7-806
Figure 7-807