Pickup Motor Drive Assembly; Removing The Cassette; Pickup Drive Assembly/Re; Pickup Drive Assembly - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
D. Pickup Motor Drive
Assembly
1. Removing the Cassette Pickup
Drive Assembly/Re-Pickup Drive
Assembly
The cassette pickup drive assembly and
the re-pickup drive assembly may be removed
in the same way. The following cites the re-

pickup drive assembly:

1) Remove the cassette pickup assembly or
the duplexing pickup assembly.
2) Remove the rear cover.
3) Disconnect the connector [1], and remove
the three screws [2]; then, remove the re-
pickup drive assembly [3].
When removing the bot-
tommost cassette pickup
assembly, remove the two
screws [4] and the pickup
driver PCB unit [5] in ad-
vance.

2. Removing the Duplexing Motor

1) Slide out the duplexing unit.
2) Remove the rear cover.
3) Open the CPU PCB.
4) Remove the three screws [1], and
disconnect the two connectors [2]; then,
detach the duplexing motor [3].
7-72
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[2] [1]
Figure 7-764
[4]
Figure 7-765
[1]
[1]
Figure 7-766
[2]
[4]
[5]
[2]