CHAPTER 11 INSTALLATION
4) Secure the unit [5] where the face plate of
the copier's rear cover is found with four
screws [6].
3. Checking Operations
Check the operations by referring to the
Copy
Data
Controll-A1
Procedure.
4. Removing from the Copier
When removing the copy data controller
from the copier, start service mode, and
execute COPIER>OPTION>IN-FACE>B-
CLR.
0:
not connected.
1:
connected.
If the setting is not '0', a communication
error 'E717' (between copy data controller
and copier) will occur.
11-36
COPYRIGHT © 2002 CANON INC.
Installation
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[5]
[6]
[6]
Figure 11-609