Separation Roller - Canon 1130 Service Manual

2) Remove the joint, and remove the deck

separation roller [3].

The urethane sponge used
on the deck separation
roller is initially pink in
color, and changes to
orange and to yellow over
time. This phenomenon is
accelerated
sponge is exposed to light,
and
characteristic of urethane
sponge.
difference in performance,
and the part is not identified
by color.
7. Adjusting the Deck Separation
Roller Pressure
If double feeding or pickup failure occurs
when pickup is from the side paper deck,
adjust the position of the pressure spring of the
deck separation roller.
• If pickup failure occurs, move the
spring in the direction of arrow A.
• If double feeding occurs, move the
spring in the direction of arrow B.
COPYRIGHT © 2002 CANON INC.
when the
is a general
There is no
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 PAPER DECK
[3]
Figure 10-345
A
B
Figure 10-346
10-37