I.
Cleaner Blade
Reciprocating Motor
1. Removing the Reciprocating Motor
Assembly
1) Remove the photosensitive drum cleaner
unit.
2) Remove the rear cover.
3) Remove the flywheel.
4) Disconnect the connector [1], and remove
the two screws [2]; then, detach the
reciprocating motor assembly [3].
J. Waste Toner Feeding
Assembly
1. Removing
the
Feedscrew Assembly
1) Remove the rear cover.
2) Remove the flywheel.
3) Remove the drum gear.
4) Remove the four screws [1], and
disconnect the high-voltage connector [2].
5) Disconnect the high-voltage connectors
of the primary/post-cleaning charging
assembly
from
transformer.
COPYRIGHT © 2002 CANON INC.
Waste
Toner
the
high-voltage
CANON CLC1100/1130/1150/1160/1180 REV.0 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[2]
Figure 6-677
[1]
[2]
[1]
Figure 6-678
[1]
[2]
[3]
[2]
[2]
6-82a