6) Disconnect the three connectors [3].
7) Remove the three screws [4], and remove
the waste toner feed drive assembly [5].
At this time, take care not to drop gears
or pins.
8) Remove the screw [6], and pull off the
waste toner feedscrew assembly [7] to the
front.
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[3]
Figure 6-679
[4]
[4]
Figure 6-680
[6]
Figure 6-681
[5]
[4]
[7]
6-83