CHAPTER 11 INSTALLATION
7) Lead the relay harness outside the rail of the
cassette as shown, and connect its 3-pin end
to the connector of the cassette heater.
8) Secure the relay harness in place with the
guides. (Be sure to fix it in place at four
locations and that its band position is to
the right of the cable guides as shown.)
11-48
COPYRIGHT © 2002 CANON INC.
Relay harness
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Route outside the rail.
Cassette heater
Figure 11-806
Cable guides
Relay harness
Figure 11-807
Band