Canon 1130 Service Manual page 116

11) Move the No. 2 mirror mount so that the
pulley shaft [6] of the No. 2 mirror mount
is visible through the long hole in the side
plate.
12) Fit the binding screw (M4x8) [7] to the
pulley shaft, and temporarily secure the
pulley to the side plate (front, rear) in
place, thereby temporarily securing the
No. 2 mirror mount in place.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
[6]
Figure 3-411 Front of the Copier
[6]
Figure 3-412 Rear of the Copier
[7]
Figure 3-413
[7]
3-13