CHAPTER 11 INSTALLATION
2) Connect the connector [3] of the power
supply unit to the connector [4] of the
diagnostic device as shown.
3) Remove the four screws [6], and detach the
face plate [5] of the copier's rear cover.
11-38
COPYRIGHT © 2002 CANON INC.
[6]
[6]
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
Figure 11-702
[5]
Figure 11-703
[3]