Canon 1130 Service Manual page 865

CHAPTER 13 TROUBLESHOOTING
MISC
Level 3
SEG-ADJ Use it to adjust the separation level between text and
photo in text/photo mode or text/silver halide mode.
K-ADJ Use it to correct the black text mechanism.
ATT-RTN1 Use it to add a single rotation to attraction rotation
for single-sided copying and copying on the 1st side
of double-sided copying using plain paper (full
color/ black).
ATT-RTN2 Use it to add a single rotation to attraction rotation
for copying on the 2nd side of a double-sided copy
using plain paper (full color/black).
ATT-RTN3 Use it to add a single attraction rotation for single-
sided copying and copying on the 1st side of a double-
sided copy using thin paper (full color/black).
ATT-RTN4 Use it to add a single rotation to attraction rotation
for copying on the 2nd side of a double-sided copy
using thin paper (full color/black).
BC-ADJ Use it to adjust the color recognition range when
pattern processing is not performed.
ACS-ADJ Use it to adjust the color recognition sensitivity for
ACS.
SENS-ADJ
Adjusts sensor-related items.
Level 3
CLN-TH Use it to enter a thermal correction value for the pre-
cleaning paper sensor (PS71).
CLN-TMP Use it to enter a thermal correction value for the pre-
cleaning paper sensor (PS71).
13-276
COPYRIGHT © 2002 CANON INC.
Description
Description
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
COPIER>ADJUST
Remarks
-3 to +3
-3 to +3
0 to 1
For ATT-RTN1 through 3,
setting '1' on a CLC1100 will
result in an additional single
rotation (for black mono only;
21 pages/min).
For ATT-RTN4, the setting is
invalid on a CLC1100.
-3 to +3
A higher setting will decrease
the recognition range (i.e., a
light color or a dark color will
be identified as white or
black, respectively).
-6 to +6
Remarks
2300 to 5500
Unit: mV
0 to 60
Unit: ºC
When you have replaced the
CPU PCB or initialized the
RAM of the DC-CPU, be sure
to enter the values recorded
on the service label.
If you have replaced the pre-
cleaning paper sensor or the
photosensitive drum, or
removed the sensor unit, be
sure to execute
COPIER>FUNCTION>SNS-
ADJ>CLN-OFST after
cleaning the sensor unit.