Mitsubishi Electric FR-A700 Technical Manual page 316

(2) Displays the set frequency during stop
[Pr. 52 = 100]
When [Pr. 52 = 100], the set frequency monitor is
displayed during a stop and the output frequency
monitor is displayed during operation. (LED of Hz
flickers during stop and is lit during operation.)
When [Pr. 52 = 100], the set frequency to be output at
start is displayed during a stop.
The value of the set frequency is different from what is
displayed when [Pr. 52 = 5] and is calculated considering
the maximum/minimum frequency and frequency jump.
The output frequency at error occurrence is displayed
during an error and the monitor displayed during MRS is
the same as at stop.
During offline auto tuning, the tuning status monitor has
priority.
0
During
running/stop
Output Output
frequency
frequency
Output
current
Output
voltage
Fault or
alarm
indication
(3) I/O terminal monitor [Pr. 52 = 55 to 57] of
the operation panel (FR-DU07)
When [Pr. 52 = 55 to 57] , the I/O terminal status can
be monitored on the operation panel (FR-DU07).
The I/O terminal monitor is displayed on the third
monitor. The LED is ON when the terminal is ON, and
the LED is OFF when the terminal is OFF. The center
line of LED is always ON.
On the unit I/O terminal monitor ([Pr. 52 = 55]), the
upper LEDs denote the input terminal status and the
lower the output terminal status.
1)
A700 F700
RM AU RES
RH STOP
MRS
RT
RL
RUN OL
ABC1 SU FU
Free
ABC2 IPF
2)
E700
RM Free RES
RH Free
MRS
Free
RL
RUN Free
Free
ABC FU
Free
Free Free
[Pr. 52] Setting
100
During During
stop running
Set Output
frequency frequency
Output current
Output voltage
Fault or alarm indication
JOG
STF CS
Input terminal
STR
Center line is always ON
Free
Free Free Free
Output terminal
Free
STF Free
Input terminal
STR
Center line is always ON
Free
Free
Output terminal
Free Free
3)
D700
RM Free
RH Free
RL Free
RUN Free
Free
ABC
Free Free
On the input option (FR-A7AX) terminal monitor ([Pr.
52 = 56*], the decimal point LED of the first digit LED
is ON.
•
A700 F700
(Built-in options cannot be connected to
X1 X4
X2 X5
X0 X3
X12 X15
X10 X13
X11 X14
On the output option (FR-A7AY, FR-A7AR) terminal
monitor ([Pr. 52 = 57*], the decimal point LED of the
second digit LED is ON.)
•
A700 F700
(Built-in options cannot be connected to
Y1 Y4
Y2
Y0 Y3
RA3
RA1
RA2
* [Pr. 52 = 56, 57] can be set even if the option is not mounted. The
monitor displays are all OFF status if the option is not mounted.
350
PARAMETER
Free Free
STF Free
Free
STR
Center line is always ON
Free
Free
Free
Free Free
Free
E700
X7
X8
X6 X9
Center line is always ON
Free
Free
DY
Free
Free Free
Decimal point LED of first
digit LED is always ON
E700
Y5
Y6
Center line is always ON
Decimal point LED of second
digit LED is always ON
Input terminal
Output terminal
.)
D700
.)
D700
FR-A7AY
FR-A7AR