NEC Electra Elite IPK II System User Manual page 462

Document Revision 4C

35-01-06 SMDR Options – Minimum Call Duration
A call must last at least this time (0~65535 seconds) to be included in the SMDR report. Default
is 0 (All).

35-01-07 SMDR Options – Minimum Ring Time (For Incoming Calls)
A call must ring for at least this time (0~65535 seconds) to be included in the SMDR report.
Default is 0 (All).

35-01-08 SMDR Options – Format Selection
For North America, set this option to 0 (default).

35-02-01 SMDR Output Options – Toll Restricted Call
Enter 1 if you want the SMDR report to Display calls blocked by Toll Restriction. Enter 0 to Not
Display blocked calls.

35-02-02 SMDR Output Options – PBX Calls
If system is behind a PBX, enter 1 to have SMDR Display all calls to the PBX. Enter 0 to have
SMDR Display only calls dialed using PBX trunk access code.

35-02-03 SMDR Output Options – Trunk Number or Name
Select whether the system should display the trunk name (0) or the number (1) on SMDR
reports. Default is 1. If this option is set to 0, Program 35-02-14 must be set to 0.

35-02-04 SMDR Output Options – Summary (Daily)

35-02-05 SMDR Output Options – Summary (Weekly)

35-02-06 SMDR Output Options – Summary (Monthly)
Enter 1 (default) to enable a summary report. Enter 0 to disable a summary report. The daily
report prints every day at midnight. The weekly report prints every Sunday night at midnight.
The monthly report prints at midnight on the last day of the month.

35-02-07 SMDR Output Options – Toll Charge Cost
Set this option to 1 to have the SMDR report Display toll charges.

35-02-08 SMDR Output Options – Incoming Call
Enter 1 (default) if you want the SMDR report to Display incoming calls. Enter 0 if you want the
SMDR report to Not Display incoming calls.

35-02-09 SMDR Output Options – Extension Number or Name
Enter 0 if you want the SMDR report to Display the extension name. Enter 1 (default) if you want
the SMDR report to Display the extension number.

35-02-10 SMDR Output Options – All Lines Busy (ALB) Output
Enter 1 to Display information when all lines in a group are busy and an extension user tries to
access the group. Enter 0 (default) if this information should not be Displayed.

35-02-11 SMDR Output Options – Walking Toll Restriction Table Number
Enter 1 (default) to Display Table Number
2 - 438
Electra Elite IPK II
Elite CallAnalyst