NEC Electra Elite IPK II System User Manual page 903

Electra Elite IPK II

22-03-01 Trunk Ring Tone Range
Select the ring tone range for the trunk. The trunk uses a ring tone in the range selected when it
rings an extension. Four ring tones are available.
(default: 0)
Operation
To change your extension incoming ring tones:
1. Press Speaker.
2. Dial 720.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8).
5. Press Speaker to hang up.
To listen to the incoming ring choices:
1. Press idle Speaker.
2. Dial 711.
3. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring.
4. For Intercom Ring:
Dial the code for the ring pattern you want to hear (1~8).
- OR -
For Trunk Ring:
Dial code for the ring pattern you want to hear (Ring 1~3, Melody 4~8). If you select Ring 1~3, a
second screen prompts for the tone pattern (1~4).
5. Press Speaker to hang up.
Selectable Ring Tones
Document Revision 4C
2 - 879