Default Settings - NEC Electra Elite IPK II System User Manual

Document Revision 4C
Conditions
If a user enters a code that exceeds 16 digits, the system ignores it.

If the system has Account Codes disabled, the digits dialed (e.g.,

SMDR report as part of the number dialed.
Do not use

trunk stops sending digits to the central office.
Account Codes appear on the SMDR report (even if they are hidden on the telephone

display).
To simplify Account Code Entry, store the Account Code (e.g., 1234) in a One-Touch Key,

and press the key instead of dialing the code.
Speed Dialing bins can contain stored Account Codes. Prevent them from being displayed

using PRG 20-07-04.
Automatic Route Selection (ARS) can force a user to enter an Authorization Code prior to

using a certain route. The system verifies the ARS Authorization Code dialed against the
ARS Authorization Code list (Program 44-03).

Default Settings

Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Automatic Route Selection
One-Touch Calling
2 - 14
in a PBX access code when using Account Codes. Otherwise, after the

Electra Elite IPK II
1234 ) appear on the
 
, the

Account Code Entry