NEC Electra Elite IPK II System User Manual page 541

Electra Elite IPK II

20-08-01 Class of Service Options (Outgoing Call Service) – Intercom Calls
Enable (1)/Disable (0) an extension user ability to place Intercom calls.

20-08-11 Class of Service Options (Outgoing Call Service) – Protect for the Call Mode Switching
from Caller
When an extension is set to ring mode for ICM calls, enable this option to prevent callers from
changing the call to voice announce mode [Disable (0)/Enable (1)].

20-11-07 Class of Service Options (Hold/Transfer Service) – Transfer Without Holding
Enable (1)/Disable (0) an extension user ability to Transfer a call without holding. If the Busy
Status Display feature is used, set this option to 0.

20-13-22 Class of Service Options (Supplementary Service) – Busy Status Display (Called Party
Status)
Enable (1)/Disable (0) an extension user ability to use the Busy Status Display feature.

20-17-01 Operator Extension – Operator's Extension Number
Assign the operator's extension. Default is 101.

20-18-01 Service Tone Timers – Extension Dial Tone Time
Set the Extension Dial Tone Time (0~64800 seconds). After getting Intercom dial tone, a
multiline terminal user has this time to dial the first digit of the Intercom call. Default is 30.

21-01-02 System Options for Outgoing Calls – Intercom Interdigit Time
Set the Intercom Interdigit Time (0~64800 seconds). When placing Intercom calls, users must
dial each digit within this time. Default is 10.

82-01-01 Incoming Ring Tone – Frequency 1
Customize the Intercom ring tone.

82-01-02 Incoming Ring Tone – Frequency 2
Customize the Intercom ring tone.

82-01-03 Incoming Ring Tone – Modulation
For Handsfree Answerback/Forced Intercom Ringing:

20-02-12 System Options for Multiline Telephones – Forced Intercom Ring (ICM Call Type)
Determine if an extension ICM calls should be set as Forced Intercom Ringing (1). If disabled
(0), Intercom calls voice-announce. For all NEC Cordless telephones, this option must be set to
1 as voice announce is impossible. Default is 0.

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
Default: Assign 101 as Class 15 and all others as Class 1.

20-08-10 Class of Service Options (Outgoing Call Service) – Signal/Voice Call
Enable (1)/Disable (0) an extension user ability to toggle between Handsfree Answerback and
Forced Intercom Ringing for outgoing Intercom calls (dial 1). Default is 1.
Intercom
Document Revision 4C
2 - 517