One-Touch Calling - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Description
One-Touch Calling gives a multiline terminal user one-button access to extensions, trunks, speed dial
bins and selected system features. This saves users time when accessing co-workers, clients and
features they use most often. Instead of dialing a series of codes, the user need only press the
One-Touch key. An extension user can have One-Touch keys programmed for:
Direct Station Selection – one-button access to extensions

Station Speed Dial – one-button access to stored numbers (up to 24 digits)

Speed Dial – System/Group/Station – one-button access to stored speed dialing numbers

Trunk Calling – one-button access to trunks or trunk groups

Service Codes – one-button access to specific Service Codes

An extension user can chain dial with One-Touch Keys. For example, a user can store the number for a
company Automated Attendant in key 1 and employee extension numbers in keys 2~5. The user can
press key 1 to call the company, then one of keys 2~5 to ring the employee they want to reach.
An extension user or system administrator can optionally store a Flash command under a One-Touch
key. This is helpful for One-Touch Keys used as Station Speed Dial bins. The stored Flash may be
helpful to access features of the connected Telco, PBX or Centrex.
Conditions
One-Touch keys provide a Busy Lamp Field (BLF).

When a multiline terminal user is on a call, they can press a DSS key for that station to

transfer to another station. It is not necessary to press Transfer to transfer to another
station using a DSS key.
A multiline terminal user on a call, must press transfer to transfer a call off site with a DSS key.

A multiline terminal user on a call, must press transfer to transfer a call to a destination that is

not a station (ACD/Voice Mail/Department group pilot, etc.).
Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered

as P in the dial string and causes the system to wait three seconds before sending the rest
of the digits that follow the P (pause). Multiple pauses can be entered.

One-Touch Calling

Document Revision 4C
One-Touch Calling
2 - 761