Code Restriction Override - NEC Electra Elite IPK II System User Manual

Hide thumbs Also See for Electra Elite IPK II System:

Table of Contents

Electra Elite IPK II

Code Restriction Override lets a user temporarily bypass the Code Restriction for an extension. This

helps a user that must place an important call that Code Restriction normally prevents. For example, you

could set up Code Restriction to block 900 calls and then provide a Code Restriction Override code to

your attendant and executives. When the attendant or executive needs to place a 900 call, they just:

Press Speaker, dial a service code and enter their override code.

Press Speaker and dial a trunk access code (e.g., 9 or

Place the 900 call without restriction.

You can assign a different Code Restriction Override code to each extension. Or, extensions can share

the same override code.

Code Restriction Override overrides

you to assign a Code Restriction level for each user. When a call is placed using Walking Code

Restriction, the restriction for the call is based on the Code Restriction level defined in Programs

21-05-xx and Programs 21-06-xx.

Off-Premise notification and external extensions require access to outside lines.

In the Class heading in the SMDR report, POTA indicates that the call was placed using

Code Restriction Override.

Code Restriction Override and Walking Code Restriction temporarily overrides an

extension Code Restriction.

If the system has VRS, users hear, "Your call cannot go through. Please call the operator"

when they dial a number that Code Restriction prevents.

Default Setting

Code Restriction Override

Code Restriction programming. Walking Code Restriction allows

Document Revision 4C

Show Quick Links

Table of Contents