NEC Electra Elite IPK II System User Manual page 165

Electra Elite IPK II
4. Dial 1 (Internal) or 0 (External).
5. Dial Trunk Access Code (default: 9) + number (9 + 2142622000).
Trunk access codes are 9 (ARS/Trunk Group Routing), 704 + Line Group (1~9, 01~99 or 001~100) or #9 + Line

number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.

To cancel Call Forwarding Off-Premise Split:
1. At the multiline terminal, press Speaker.
- OR -
2. At a single line telephone, lift the handset.
3. Dial the Call Forward Access Code (default not assigned).
4. Dial 0 (Cancel).
If Internal and External are set both are canceled.

Your DND or Call Forwarding (Device) Programmable Function key flashes.

Off-Premise Call Forwarding for Door Boxes
These operations are performed at the Door Box Ringing Extension only.

To activate Call Forwarding Off-Premise for a Door Box:
 This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press Speaker + dial SC 722.
- OR -
At the multiline terminal only, press Call Forward (Device) key (PRG 15-07-01 or SC 751, code
54).
- OR -
At the single line telephone, lift the handset + dial 722.
2. Dial the Door Box number (1~4).
3. Dial the Speed Dialing number where the calls should be forwarded.
4. Press Speaker (or hang up at the single line telephone) to hang up.
Call Forwarding, Off-Premise
Document Revision 4C
2 - 141