Paging, External - NEC Electra Elite IPK II System User Manual

Hide thumbs Also See for Electra Elite IPK II System:

Table of Contents

With External Paging, a user can broadcast announcements over paging equipment

connected to external Paging zones. When a user pages on of these external zones, the

system broadcasts the announcement over the speakers. Like Internal Paging, External

Paging allows a user to locate another employee or make an announcement without calling

each extension individually.

The Electra Elite IPK II system allows up to eight External Paging zones, or a common zone

output provided by the KSU (Speaker 9). All other speakers (1~8) require a port on a

PGD(2)-U10 ADP, with a maximum of two external paging circuits per module. You must

have four PGD(2)-U10 ADPs to get the eight external zones. In addition, each external zone

has an associated relay contact. When a user pages to a zone, the corresponding contact

activates (closes). This provides for Paging amplifier control.

Combined Paging

Use Combined Paging when you want to simultaneously Page into an internal and

corresponding external zone. For example, you can Page your company warehouse and

outside loading dock at the same time. Combined Paging is available for zones 1~8 and All

Call. Refer to

Paging, Internal on page 2-775

addition, you can program a Function Key as a Combined Paging key. Using the External

Page Function Key, when an All Call External Page Function Key is programmed, it includes

both the external zones and the assigned internal zone(s). If the internal page zone is busy

or there are no extensions in a page group, the announcement is made on the external zones

The Electra Elite IPK II provides a common zone output provided by the KSU.

For more than one external page zone, External Paging requires PGD(2)-U10

ADPs and customer-provided paging equipment.

Talkback paging requires using a PGD(2)-U10 ADP. The Electra Elite IPK II

common zone output provided by the KSU does not allow talkback.

A common zone output is provided by the KSU and is considered Zone

programming.

A Class of Service option is available in system programming to prevent display

telephones from showing incoming paging information. This allows the system

to save processor time and speed up system operation.

Paging, External

for more on setting up Combined Paging. In

Show Quick Links

Table of Contents