NEC Electra Elite IPK II System User Manual page 606

Document Revision 4C
PVA(X)-U( ) ETU/Combo Card LED Indications:

Non Peer-to-Peer MEGACO IP Station and SIP IP Station calls are indicated by a Flashing

RED LED.
CCISoIP Trunk and SIP Trunk calls are indicated by a Solid RED LED.

Default Setting
None
System Availability
Terminals
SIP Trunks Compliant with RFC 3261
Required Component(s)
PVA(X)-U( ) ETU – MG16 1.50 package or Higher
IPK II CPUII Version 1.50 or Higher
SIP License
PVA(X)-U( ) ETU with PVA Combo Application package 1.00 or Higher and Elite IPK II CPUII
Version 2000 or Higher
Related Features
Reference the Elite IPK II VoIP (Voice over Internet Protocol) Installation Manual
Programming
VoIP Settings
PVA(X)-U( ) ETU
When the
Application for the Elite IPK II KSU to recognize the VoIP MG16 ETU. [Reference the
upgrade installation procedure
2 - 582
is first purchased it has a factory default package installed. You must load the MG16
].
Electra Elite IPK II
PVA(X)-U( ) ETU
Firmware
IP Trunk (SIP) – MG16