NEC Electra Elite IPK II System User Manual page 956

Document Revision 4C
Programming

15-01-01 Basic Extension Data Setup – Extension Name
Program name for system extensions.

15-07-01 Programmable Function Keys
Assign an Extension Name Change key (55) to extensions.

20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.

20-13-21 Class of Service Options (Supplementary Service) – Extension Name
Enable (1)/Disable (0) an extension user ability to program their name.
(default: 1)
Operation
To program your extension name:
1. Press Speaker.
2. Dial 700.
- OR -
Press the Extension Name Change key (PRG 15-07 or SC 751: 55).
3. Press Hold.
4. Enter the name. (Refer to
Your name can be up to 12 digits maximum.

5. Press Hold.
6. Press Speaker to hang up.
To program any extension name:
1. Press Speaker.
2. Dial 700
- OR -
Press the Extension Name Change key (PRG 15-07 or SC 751: 55).
3. Enter the extension number to be named.
4. Enter a name. (Refer to
The name can be have to 12 digits maximum.

2 - 932
Table 2-31 Selectable Display Messaging Defaults on page
Table 2-38 Keys for Entering Names.).
Station Name Assignment – User Programmable
Electra Elite IPK II
2-873.)