NEC Electra Elite IPK II System User Manual page 260

Document Revision 4C

21-05-04 Toll Restriction Class – Maximum Number of Digits Table Assignment
For the Class you select, Enable (1)/Disable (0) the dialing limit for calls. When enabling, select
from entries 1~4 in Program 21-06-03.

21-05-05 Toll Restriction Class – Common Permit Code Table
For the Class you select, Enable (1)/Disable (0) the Common Permit Code Table (Program 21-
06-04).

21-05-06 Toll Restriction Class – Common Restriction Table
For the Class you select, Enable (1)/Disable (0) the Common Restrict Code Table (Program 21-
06-05).

21-05-07 Toll Restriction Class – Permit Code Table
For the Class you select, Enable (1)/Disable (0) the Permit Code Table. When enabling, select
from tables 1~4 in Program 21-06-06.

21-05-08 Toll Restriction Class – Restriction Table
For the Class you select, Enable (1)/Disable (0)) the Restrict Code Table. When enabling, select
from tables 1~4 in Program 21-06-07.

21-05-09 Toll Restriction Class – Restriction for Common Speed Dials
For the Class you select, Enable (1)/Disable (0) Code Restriction for Common Speed Dialing
numbers.

21-05-10 Toll Restriction Class – Restriction for Group Speed Dials
For the Class you select, Enable (1)/Disable (0) Code Restriction for Group Speed Dialing
numbers.

21-05-11 Toll Restriction Class – Intercom Call Restriction
For the Class you select, Enable (1)/Disable (0) Intercom Call Restriction. If enabled, extensions
cannot place or receive Intercom calls.

21-05-12 Toll Restriction Class – PBX Call Restriction
For the Class you select, Enable (1)/Disable (0)) PBX Call Restriction.

21-05-13 Toll Restriction Class – Restriction of Tie Line Calls
Enable (1)/Disable (0t the Toll Restriction set up in PRG 34-08-01 .

21-06-01 Toll Restriction Table Data Setup – International Call Restriction Table
Enter the international dialing codes you want to restrict.

21-06-02 Toll Restriction Table Data Setup – International Call Permit Code Table
Enter the international dialing codes you want to permit.

21-06-03 Toll Restriction Table Data Setup – Maximum Number of Digits Table Assignment
Select the maximum number of digits allowed in outgoing calls for each table (4~30).

21-06-04 Toll Restriction Table Data Setup – Common Permit Code Table
Program codes in the Common Permit Code Table.

21-06-05 Toll Restriction Table Data Setup – Common Restriction Table
Program codes in the Common Restrict Code Table.
2 - 236
Electra Elite IPK II
Code Restriction