NEC Electra Elite IPK II System User Manual page 581

Electra Elite IPK II
Operation
Registration Override for MEGACO Phones
The registration override feature gives users access to their IP telephone from any location by using the
override login function. Users can log into their IP Station in the office or remotely at the home office.
Use registration override and enter the override access code.
Override Login
Enter Code:
Central Office
The above example displays the user using the Override function in the Central Office and remote Home
Office. Two IP Phones are required; each IP Phone registers as 3999. When the IP Phone is registered
as extension 3999, the other phone is in Registration Override Mode.
 The IP Phones share the IP extension; one assumes the extension number and the other remains in the
override mode.
Key System Programming:
None required
IP Terminal Programming
1. Access IP Terminal Programming
2. Select Option 3 – Extension Numbering.
3. Enter the extension number you wish to override, press the Set and Save softkeys.
 The extension number entered should be an IP Phone that is registered in PRG 15-05 IP Phone
Options and PRG 11-02 Extension Numbering.
4. Observe the IP terminal display prompting the Override Access Code.
5. The Override login code is the Extension Number.
6. The IP Phone registers online.
IP Station (MEGACO) – MG 16

Hold + Transfer +
Document Revision 4C
Extension 3999
Home Office
+ .
#

2 - 557