NEC Electra Elite IPK II System User Manual page 631

Electra Elite IPK II

47-05-01 Master Announcement Mailbox Options – Next Call Routing Mailbox
If you set up an Announcement Mailbox for ACD Delay Announcements, provide additional
routing options to the Automated Attendant callers.
Options
Number (01~16)
Undefined (0)
(default: 0)
Operation
Calling Your Mailbox
To call your mailbox:
With a multiline terminal, your Voice Mail key flashes green and your Message Center keys flash red
when they have messages waiting. If you do not have a Voice Mail key, your Message Waiting LED
flashes instead.
Multiline Terminal
1. Press your Voice Mail key (PRG 15-07 or SC 751: 01 +
- OR -
Press the Vmsg softkey.
- OR -
Press the Message key on the telephone, if equipped.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-worker's

mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press Speaker and dial
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.

Normally, your Message Waiting (MW) LED goes out (if applicable). If it continues to flash, you have

unanswered Message Waiting requests or a new General Message. Go to To check your messages below.
Single Line Telephone
1. Lift the handset and dial
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox number

instead. You can also use this procedure from your own telephone to call a co-worker's mailbox.
2. If requested by Voice Mail, enter your security code.
IPK II In-Mail
8.

8.

Document Revision 4C
8).

2 - 607