Private Line - NEC Electra Elite IPK II System User Manual

Electra Elite IPK II
Description
A Private Line is a trunk reserved for a multiline terminal for placing and answering calls. A user with a
Private Line always knows when important calls are for them. Additionally, the user has their own trunk
for placing calls that is not available to others in the system.
Conditions
Incoming Only – The multiline terminal has a Private Line only for incoming calls. The user

cannot place calls on the Private Line.
Outgoing Only – The multiline terminal has a Private Line only for outgoing calls. The

Private Line does not ring for incoming calls.
Both Ways – The multiline terminal has a Private Line for both incoming and outgoing calls.

Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).

Other programmed options for outgoing calls also affect a Prime Line.

Calls to extensions with DND active do not follow Call Forwarding programming. Direct

Inward Line (DIL) calls ring an idle Department Group member, then follow 22-08
programming then 22-05 programming.
An extension user can have Line Preference options applied to their Private Line.

A Private Line can also be a Prime Line.

You should always program a line key for each Private Line.

Private Lines are available on single line telephones.

Private Lines follow normal Toll Restriction.

An extension user can transfer their Private Line. Since other users have hold access, the

destination can answer the transferred Private Line and place it on Hold.
NEC does not recommend assigning ringdown to a private line.

Default Setting
Disabled

Private Line

Document Revision 4C
Private Line
2 - 811