NEC Electra Elite IPK II System User Manual page 243

Electra Elite IPK II
Table 2-13 Class of Service Options for DISA/E&M Service, Program 20-14
Item
No.
01 First Digit Absorption (Delete First Digit Dialed)
For Tie Lines, Enable/Disable the ability to absorb (ignore)
the first incoming digit. Use this to make the tie trunk
compatible with 3- and 4-digit Tie Line service. This option
does not apply to DISA.
02 Trunk Group Routing/ARS Access
Enable/Disable a DISA or tie trunk caller ability to dial 9 for
Trunk Group Routing or Automatic Route Selection (ARS).
03 Trunk Group Access
Enable/Disable a DISA or tie trunk caller ability to access
trunk groups for outside calls (Service Code 704).
04 Outgoing System Speed Dialing
Enable/Disable a DISA or tie trunk caller ability to use
System Speed Dialing.
05 Operator Calling
Enable/Disable a DISA or tie trunk caller ability to dial 0 for
the telephone system operator.
06 Internal Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system Internal Paging.
07
External Paging
Enable/Disable a DISA or tie trunk caller ability to use the
telephone system External Paging.
08
Direct Trunk Access
Enable/Disable a DISA or tie trunk caller ability to use Direct
Trunk Access (Service Code 715).
09
Forced Trunk Disconnect <Not for ISDN T-point>
Enable/Disable a tie trunk caller ability to use Forced Trunk
Disconnect (Service Code
to DISA callers.
10 Call Forward Setting by Remote via DISA
Enable/Disable a DISA callers ability to use the Call Forward
service codes (PRG 11-11-01 through PRG 11-11-05).
11
DISA/Tie Trunk Barge-In
Enable/Disable a DISA or tie trunk caller ability to use
Barge-In.
Class of Service
Item
26). This option is not available

Document Revision 4C
Default
Input
Data COS
01~14
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
COS 15
0
1
1
0
1
1
1
0
0
0
0
2 - 219