NEC Electra Elite IPK II System User Manual page 612

Document Revision 4C

84-13-27 SIP Trunk CODEC Information Basic Setup – RX Gain
Set the receive gain.
Entries: 0~28 (-14dBm ~ +14dBm)
(Default: 10)
0 = -14dBm
1 = -13 dBm
14 = 0 dBm
27 = 13 dBm
28 = 14 dBm

84-13-28 SIP Trunk CODEC Information Basic Setup – Audio Capability Priority
Define the CODEC Priority.
Entries: 0=G.711, 2=G.729
(Default: 0)

84-13-31 SIP Trunk CODEC Information Basic Setup – DTMF Payload Number
Define the DTMF Payload Number.
Entries: 96~127
(Default: 110)

84-13-32 SIP Trunk CODEC Information Basic Setup – DTMF Relay Mode
Determine the DTMF setup.
Entries: 0 = Disable, 1 = RFC2833
(Default: 0)
SIP DNS Setup

10-29-08 SIP Server Information Setup – DNS Server Mode
Define the DNS Mode. If the SIP carrier provides a domain name, set this option to1.
Entries: 0 = Off, 1 = On
(Default: 0 = Off)

10-29-09 SIP Server Information Setup – DNS Server IP Address
Define the DNS IP Address (normally provided by the SIP carrier). Enter the carrier-provided
information or enter a valid DNS server IP address.
Entries:
0.0.0.1~126.255.255.254
128.0.0.1~191.255.255.254
192.0.0.1~223.225.255.254
(Default: 0.0.0.0)

10-29-10 SIP Server Information Setup – DNS Port Number
Define the DNS Transport port.
Entries: 0~65535
(Default: 53)
2 - 588
Electra Elite IPK II
IP Trunk (SIP) – MG16