FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Step 2 Connect wiring terminals of the L1, L2, and L3 wires of the input power cable
respectively to the corresponding terminals of the external power cable.
Step 3 Connect the PE cable to the cabinet ground screw, as shown in the following
figure.
Exercise caution while connecting cables. Prepare protective tools in advance.
Figure 4-23 Dual power supply cabling
----End
4.5.3 Connecting Signal Cables
Prerequisites
Before connecting signal cables, take effective ESD protection measures.
Issue 05 (2022-12-15)
NO TICE
CA UTION
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
57