How Do I Import A Certificate And Key - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Figure 11-17 Data process 2
Step 8 After the file is imported successfully,
Figure 11-18 Importing the file successfully
Step 9 Tap Maint > USB Operations > Remove USB to remove the USB flash drive.
----End

11.1.19 How Do I Import a Certificate and Key?

Prerequisites
You have obtained CA certificate file, local certificate file, and key file into a
USB disk that is connected to the USB port located on the side of the main control
board and has been recognized.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
● Ensure that the key file has been encrypted using AES128.
● Before using a USB flash drive, ensure that its data has been scanned by
antivirus software and is secure.
Issue 05 (2022-12-15)
NO TE
If the file fails to be imported, a failure message will be displayed.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure 11-18 is displayed. Then tap Finish.
11 FAQ
152