Huawei FusionCol8000-C210 User Manual page 102

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Step 2 Set SNMP Version as required and tap Submit.
●
●
Step 3 Set Read Community and Write Community.
1.
2.
Step 4 Add an SNMPv3 user.
1.
2.
3.
Issue 05 (2022-12-15)
When SNMP Version is set to ALL or SNMPv1&v2c, you can set Read
Community and Write Community.
When SNMP Version is set to ALL or SNMPv3, you can add an SNMPv3 user.
CA UTION
SNMPv1&SNMPv2c are insecure protocols. SNMPv3 is recommended.
Tap the text box next to Read Community, set the read community
parameter based on the actual plan, and tap Submit.
Tap the text box next to Write Community, set the write community
parameter based on the actual plan, and tap Submit.
Tap Add under SNMP V3.
Set User Name, Auth Protocol, and Prop Protocol based on the actual plan.
MD5 and DES protocols are not secure. It is recommended that you set Auth
Protocol to SHA2-512, and set Prop Protocol to AES-256. The following
operations use the recommended settings as an example.
Figure 5-11 Setting the protocol type
NO TICE
Passwords of an authentication protocol and proprietary protocol must
comply with the following policies:
– The password must contain at least two types of characters among
uppercase letters (A–Z), lowercase letters (a–z), and digits (0–9). The
password must contain 8 to 15 characters and be different from the user
name or its reverse.
– A password must not be a string containing duplicate sections, such as
12a12a12a.
– Weak passwords such as Password, Admin_1243, and Changeme_123 are
not allowed.
Set SHA Password and Confirm Password as planned.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
94