FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
10.8 Replacing a Fan Drive
Procedure
Step 1 Open the cover of the electric control box and turn off the switch of the faulty fan
drive.
Step 2 Remove the air filter in the middle and push down the clip on the fan drive to be
replaced.
Figure 10-11 Removing the fan drive
Step 3 Pull out the handle and directly remove the fan drive from the subrack.
Step 4 Insert the spare fan drive into the corresponding slot in the power distribution
subrack, and push the latch downwards to lock the fan drive.
Step 5 Turn on the switch of the fan drive and reinstall the cover of the electric control
box.
Step 6 After the home screen is displayed, check that the smart cooling product is
running properly and no alarm is generated.
----End
10.9 Replacing a PSU
Issue 05 (2022-12-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
129