Optional) Connecting A Motorized Damper; Installation Verification - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Place the sheet metal of the water sensor upwards and its detection board
downwards on the ground.
----End

4.10 (Optional) Connecting a Motorized Damper

For details about how to install a motorized damper, see the document delivered
with the motorized damper.

4.11 Installation Verification

After the indoor unit is installed, check the components one by one.
Table 4-6 Component checklist
Check Item
Equipment
Water pan
Wet film
humidifier
(optional)
Fan
Air filter
Differential
pressure
switch
Issue 05 (2022-12-15)
NO TICE
Expected Result
The equipment is installed properly
without any tilt.
The equipment is secured to the bottom
support using bolts.
Sundries inside the equipment such as
cable ties and cable cuts are cleaned up.
The anchor baffle plates have been
installed.
The foreign matter inside the water pan is
cleaned up.
The water inlet solenoid valve is secured.
The wet film humidifier is secured reliably
and steadily.
Pipes are connected securely without
leakage.
The fan has no foreign matter inside.
The air filter is correctly installed
according to the airflow direction marked
on the frame.
The cable ties are securely tightened
around pressure tubes.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
Actual Result
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
□Passed □Failed
71