Optional) Connecting The Water Sensor - Huawei FusionCol8000-C210 User Manual
In-room chilled water smart cooling product
Hide thumbs
Also See for FusionCol8000-C210:
- Quick manual (16 pages) ,
- Quick manual (19 pages) ,
- User manual (173 pages)
Table of Contents
Advertisement
FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
4.9 (Optional) Connecting the Water Sensor
Context
This section describes how to connect a water sensor. A water detection cable can
also be connected.
A water sensor monitors resistance changes at terminals to determine whether
the floor is watery. When the terminals of a water sensor detect water or other
conductive liquid, resistance between the two terminals decreases. Keep water
sensors far away from water traps or floor drains.
Procedure
Step 1 Connect one end of the water sensor cable to the water sensor.
Step 2 Connect the other end of the water sensor cable to the signal terminals 1 and 2 of
X502 through the bottom of the cabinet.
Figure 4-36 Connecting the water sensor
Step 3 Secure the cable to the post of the cabinet using cable ties.
Issue 05 (2022-12-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
70
Advertisement
Table of Contents
