Connecting A Drainpipe; Connecting The Humidifier Water Inlet Pipe - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual

4.4.1 Connecting a Drainpipe

Context
● The external drainpipe must have a certain gradient (> 1:50), and no
accumulated water is allowed.
● The entire drainpipe should be closely wrapped with thermal insulation foam.
● Both hoses and rigid pipes can be connected. This section uses rigid pipe
connection as an example.
Drainpipe
Step 1 Install a pipe adapter and seal it with sealant.
Step 2 Wrap the drainpipe with thermal insulation foam and route it through the water
pipe hole at the top of the cabinet.
Step 3 Connect the PPR water pipe using a heat gun and wrap the pipe with thermal
insulation foam.
Figure 4-16 Connecting a drainpipe
Step 4 Connect the drainpipe to the external drainage system.
----End

4.4.2 Connecting the Humidifier Water Inlet Pipe

Issue 05 (2022-12-15)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
49