NorthStar 958 Operator's Manual page 87

958 Operator's Manual, Rev. A
Chapter 6 - Understanding the Waypoints Function
3. Press the ADD key to display the NEW WAYPOINT screen.
4. Enter a waypoint name and optional description.
5. Choose a symbol for the waypoint by pressing the
SYMBOL menu key to find the symbol you want.
6. Enter the waypoint's coordinates. If you want to switch
among displaying coordinates as lat/lon, as loran TDs, or
as distance and bearing coordinates, press the COORD
TYPE menu key:
>
For loran TDs, enter any legitimate pair of TDs and the
GRI for the pair. After entering the GRI, check the name
of the GRI that's automatically displayed to ensure it's
correct.
>
For distance and bearing from your present position,
leave the FROM point set to -HERE-, and enter the
bearing and the distance to the desired waypoint.
>
For distance and bearing from any other stored
waypoint, press the FROM menu key to display a list of
waypoints. Press the CURSOR PAD to select the desired
waypoint and press the ENTER key. Enter the bearing
and the distance from the designated waypoint to the
new waypoint. If you change your mind and want to
return to specifying distance and bearing from your
present position instead of from another waypoint, press
the FROM HERE menu key on the waypoint list screen
Page 79