NorthStar 958 Operator's Manual page 125

Selecting the
starting point
Reversing the route
Starting the route
958 Operator's Manual, Rev. A
Chapter 8 - Understanding Waypoint/Route Navigation
From here, you can perform the following functions:
•
select a starting waypoint or leg
•
reverse the route
•
start following the route
Initially, the nearest waypoint is selected as the starting point
of the route. You can press the CURSOR PAD select a different
waypoint or route leg. To see a small or large area of the route,
press the IN and OUT keys, respectively. If you decide not to
follow this route, press the RETURN menu key to go back to
the ROUTES screen.
To follow the route in the opposite way of the route's small
directional arrows, press the REVERSE menu key. The
direction of the route and the arrows will change from end to
end.
To go directly to any selected waypoint in the route (the
nearest one is the default), press the GO TO WAYPT menu key,
then press the ENTER key. The 958 calculates a track line
from your present position to the selected route waypoint.
If you want to start navigating along a route leg, rather than
directly to a waypoint, select the leg by moving the cursor
Page 117