Changing Scale And Rotation - NorthStar 958 Operator's Manual

Chapter 10 - Understanding Radar Functions

Changing scale and rotation

Changing the scale
Page 130
4. To control the radar overlay from the CHART screen (for
example, to adjust its transparency), press the CONTROL
key so that it shows RADAR:
5. When you overlay a radar image on a chart, you can
choose whether the radar should be opaque (the chart
doesn't show through) or transparent (the chart shows
through faintly):
Press the ADJUST RADAR key, then access page 2 by
•
pressing the NEXT key if needed.
Press the FADE key to select off (no transparency), 1,
•
or 2 (maximum transparency).
If you power off the 958, when you turn it on again, the chart
still has a radar overlay.
To remove the radar overlay, press the CHART SETUP key,
then press RADAR OVERLAY OFF.
To change the radar's scale, press the IN key to zoom in
(smaller area, more detail) and the OUT key to zoom out (wider
area, less detail), as described in "Zooming in and out"
beginning on page 41.
958 Operator's Manual, Rev. A