NorthStar 958 Operator's Manual page 97

Moving waypoints
and routes from a
958 Operator's Manual, Rev. A
WAYPTS OR ROUTES TO TRANSFER and the status-bar
message NO TRANSFER DONE.
•
If the master unit is completely full of waypoints and
routes with no more room available, the master unit
displays the dialog-box message LOCAL UNIT STATUS
ERROR [002] DATABASE FULL and the status-bar message
COMMUNICATION ERROR.
7. If the transfer is successful, the master unit's status bar
displays the message TRANSFER COMPLETE. You can now
press any key to resume other operations.
When you move waypoints from unit 1 (the designated
master) into unit 2, the entire contents of unit 1 are exported
into unit 2. Also, if any waypoint or route name matches exist,
unit
the waypoints or routes from unit 1 will overwrite the
waypoints or routes already in unit 2.
If you press any function key on the master unit during the transfer, the
error message
the process will be aborted, and the master unit will display the particular
screen accessed by that function keypress. You can press any key on the
other unit without interrupting the transfer process.
To purposely stop the transfer at any time, press the
STOP
press the
TRANSFER ABORTED BY KEY HIT
TRANSFER ABORTED
message
to that point are in the receiving unit (be aware that a particular route may
not comprise all of its waypoints due to the transfer interruption). Press
START
the
that all waypoints and routes, not just the ones already in the receiving
unit and the ones left to be transferred, are re-transferred).
1. Choose the unit you'd like to use as the "master."
Remember: You can use either of two units because both
units are capable of importing or exporting waypoints and
routes. Make sure the second unit is on.
2. At the "master" unit, press the WAYPTS/ROUTES key to
display the WAYPOINTS AND ROUTES screen.
Chapter 6 - Understanding the Waypoints Function
NOTE:
TRANSFER ABORTED BY KEY HIT
key, the master unit displays the dialog-box message
key again to re-start the entire transfer process (this means
STOP
, and the status bar displays the
. Waypoints and routes transferred up
will be displayed,
key. If you
Page 89