Steering To A Waypoint - NorthStar 958 Operator's Manual

Chapter 8 - Understanding Waypoint/Route Navigation
Navigating to
previously stored
waypoints

Steering to a waypoint

Page 112
This lets you select a stored waypoint from a list of waypoints,
and then go to the waypoint:
1. Press the WAYPTS/ROUTES key, then press the WAY-
POINTS menu key. You may have to press the NEXT VIEW
menu key to display the most convenient list (often the
LOCAL list, since the waypoints you navigate to are usu-
ally nearby).
2. Press the CURSOR PAD to select the waypoint you want
to navigate to.
3. Press the GO TO menu key, then press the ENTER key.
The 958 begins guiding you directly to the waypoint.
To display information that helps guide you directly to your
destination waypoint, press the STEER key. If you press the
STEER key twice, you'll display two versions of the steering
screen: Use whichever one you like.
958 Operator's Manual, Rev. A