NorthStar 958 Operator's Manual page 96

Chapter 6 - Understanding the Waypoints Function
Page 88
4. Press the IMPORT menu key to display the IMPORT DATA
screen. The status bar in the center of the screen displays
the message READY TO TRANSFER to show that the
transfer is ready to start.
5. Before transferring, you can check the communication
link between the two units by pressing the TEST COMM
key. The status bar should display the message REMOTE
LINK OK.
6. To move waypoints and routes into this master unit from
the other unit, press the START key. The status bar
displays the message TRANSFERRING and updates every
second with the number of waypoints and routes already
received against the total quantity to be received. The
progress bar, located below the status bar, graphically
displays the percentage completed.
If there's a problem with the transfer process, the
following messages may appear:
•
If the other unit is off-line, the master unit displays the
dialog-box message COULDN'T GET REMOTE
WAYPT/ROUTE COUNT and the status-bar message
COMMUNICATION ERROR.
•
If the other unit doesn't have any waypoints and routes,
the master unit displays the dialog-box message NO
958 Operator's Manual, Rev. A