Installing Software Updates; Displaying Manufacturer's Information - NorthStar 958 Operator's Manual

Chapter 12 - Setting Up Your 958

Installing Software Updates

Displaying manufacturer's information

Page 178
To set up Port 2 for radar:
1. Press the STAR key to display the OPTIONS/SERVICE
INFO screen.
2. Press the PORT SETUP OPTIONS key.
3. Press the PORT 2 SETUP key.
4. Press the EDIT key.
5. Set the output format to "Radar" by using the CURSOR
PAD up or down keys.
6. Press the ENTER key.
You can install current software updates by obtaining a
Navionics-style software update cartridge from Northstar or
your local authorized Northstar dealer.
Do not remove the card and do not turn the unit off while
the update is in progress or your 958 system will be corrupted.
1. Press the STAR key to display the OPTIONS/SERVICE
INFO screen.
2. Press the MORE key.
3. On the MORE OPTIONS/SERVICE INFO screen, press the
SOFTWARE UPDATE key.
4. On the SOFTWARE UPDATE screen, to install the update,
follow the instructions on your screen.
To see your 958's serial number and hardware specifications,
press the STAR key until you see the OPTIONS/SERVICE INFO
screen.
CAUTION!
958 Operator's Manual, Rev. A