NorthStar 958 Operator's Manual page 155

YOU'VE ARRIVED
AT WAYPT: 'NAME'
YOU'VE ENTERED
AVOID ZONE
NOW NAVIGATING
TO WAYPT: 'NAME'
958 Operator's Manual, Rev. A
Table 6: 958 alarms (continued)
Vessel has entered the arrive radius of an
active waypoint. This alarm is shown only
if you've chosen manual waypoint switch-
ing, or when you're navigating to a single
waypoint.
Vessel has entered the warning radius of
an avoidance waypoint. This alarm is
shown only if you've turned it on at the
ALARMS
screen.
Vessel has switched to the next leg of the
route.
Chapter 11 - Alarms, TideTrack, and Video Display
Within 10 seconds.
Does not time out.
Within 10 seconds.
Page 147
N
Y
N