Chapter 4 - Using the Chart Screen
Splitting the screen
Page 46
•
rotate the chart (ROTATE key); for details, see "Rotating
the chart" starting on page 49
•
return to vessel mode (VESSEL key)
display or change the setup functions for the CHART
•
screen (CHART SETUP key); for details, see "Setting up
the chart screen" starting on page 53
specify points to go to on the CHART screen (GO TO
•
CURSOR key)
If you have radar and/or the echo sounder installed and
operational, you'll see the SPLIT key when you view the
CHART screen; otherwise, you'll see a VIDEO key. The
following discussion assumes that the SPLIT key is available.
You can split the screen in the following ways:
•
Overlay video
•
View the chart alone
•
View the chart and sounder together
•
View the chart and radar together
•
View the chart, radar, and sounder together
•
View the radar alone
The following figure shows examples of the available screens.
958 Operator's Manual, Rev. A