NorthStar 958 Operator's Manual page 141

Controlling radar
Rotating the radar
image
Adjusting the radar
Using the radar
markers
Viewing more info
958 Operator's Manual, Rev. A
Press the CHART|RADAR key to see the chart and radar
•
together
• Press the CHART|RADAR|SOUNDER key to see the chart,
radar, and sounder together
Press the RADAR key to see the radar only
•
For details about split screens, see "Controlling the screen"
starting on page 48.
There's less room on a split screen than on a full screen. For detailed
viewing of the radar, choose a full screen.
If you want to control the radar, the CONTROL key must
indicate RADAR.
If necessary, press the CONTROL key repeatedly until it
indicates RADAR.
Press the ROTATE key repeatedly to set the screen rotation.
You can choose North up, course-up, heading-up, or leg-up.
Press the ADJUST RADAR key to display the first of three
pages of radar adjustments. For more information about using
these keys, see see "Using the adjust radar keys" starting on
page 134.
Press the RADAR MARKERS key to display the first of three
pages of controls for the 958's range rings, bearings, electronic
bearing lines (EBLs), variable range markers (VRMs), and guard
zones. For more information about using these keys, see see
"Using the radar markers keys" starting on page 137.
Press the MORE INFO menu key to display an "info bar" at the
bottom of the screen. Each additional press of the MORE INFO
key shows the following information:
Chapter 10 - Understanding Radar Functions
NOTE:
Page 133