Using Demo Mode - NorthStar 958 Operator's Manual

Chapter 1 - Getting Started

Using demo mode

Page 14
The GPS POSITION screen shows the following information:
•
your vessel's position in lat/lon (or TDs, if enabled)
your vessel's present SOG and COG
•
•
current time, day, and date
•
geodetic datum (for details, see "Appendix C - Geodetic
Datums" starting on page 197)
For details about determining and displaying your position,
see "Determining Your Position" starting on page 59.
You can use demo mode to simulate a stationary position, or
simulate going to a cursor location on the CHART screen.
To access demo mode, on the CHART screen, press the CHART
SETUP key, then press the DEMO CONTROL key to display
the DEMO CHART screen.
958 Operator's Manual, Rev. A