NorthStar 958 Operator's Manual page 115

958 Operator's Manual, Rev. A
4. Press the ENTER key to display the second EDIT ROUTE
screen.
From here you can add or remove any waypoints from the
route.
Adding waypoints to a route
1. Press the CURSOR PAD to move the left-hand pointer to
the spot where you want to insert another waypoint in
between two existing waypoints. (To add a waypoint to the
beginning of the route, be sure to position the pointer
above the first waypoint, not right onto it.)
2. Press the INSERT menu key to display the SELECT WAYPT
screen that lists all your stored waypoints. To switch
between the LOCAL and ALPHA lists, press the NEXT
VIEW key. Note: you can't add an avoidance point into a
route.
3. Move the cursor to select the desired waypoint, then press
the ENTER key to add the waypoint to the route.
Chapter 7 - Understanding the Routes Function
Page 107