Quick-Start Waypoint - NorthStar 941X Reference Manual

Quick Start
Waypoint
coordinates
Page 54
T
he 941X's "Quick Waypoint" feature allows you to enter coordinates
and start navigating in one quick and easy sequence.
Press the WAYPTS/ROUTES key, and then press the QUICK WAYPT
menu key. A screen for entering waypoints appears.
Key-in the coordinates of the waypoint (just as you would normally store
a waypoint) and press ENTER twice.
The 941X stores the waypoint as a "–QUIK–" waypoint, and will imme-
diately begin navigating to it.
To change the type of coordinates you want to enter—from lat/lon, to
distance and bearing, or to loran TDs—press the COORD TYPE menu
key to show the type you wish to use.
Coordinates may be entered as:
1. latitude/longitude of any point in the world
2. distance and bearing from "here" (your present position), or from
any waypoint in the 941X's memory
3. loran TDs (make sure the GRI displayed is correct; change it if nec-
essary).
The coordinates you enter will be stored in the 941X's memory as a way-
point named "–QUIK–." This waypoint's coordinates will be overwritten
the next time a QUICK waypoint is entered.
5 — Waypoint and Route Navigation 5 — Waypoint and Route Navigation
5 — Waypoint and Route Navigation 5 — Waypoint and Route Navigation
Rev. D